Clarion CD Player DXZ466MP User Manual

Owner’s manual  
ㄏノ弧明書  
사용 설명서  
CD/MP3/WMA RECEIVER/CeNET CONTROL  
CD/MP3/WMA 钡Μ竟/CeNET 北制  
CD/MP3/WMA 리시버/CeNET 컨트롤  
 
Contents  
1. FEATURES ........................................................................................................................... 2  
2. CONTROLS .......................................................................................................................... 3  
MAIN UNIT............................................................................................................................. 3  
3. BUTTON TERMINOLOGY ................................................................................................... 4  
Names of the Buttons and their Functions............................................................................. 4  
Major Button Operations when external equipment is connected to this unit ........................ 5  
Display Items.......................................................................................................................... 6  
LCD Screen............................................................................................................................ 6  
4. PRECAUTIONS .................................................................................................................... 7  
5. HANDLING COMPACT DISCS ............................................................................................ 8  
(
)
6. DCP Detachable Control Panel ........................................................................................ 9  
7. REMOTE CONTROL .......................................................................................................... 10  
Inserting the Battery............................................................................................................. 10  
Functions of Remote Control Unit Buttons............................................................................11  
8. OPERATIONS ..................................................................................................................... 12  
Basic Operations ................................................................................................................. 12  
Radio Mode Operations ....................................................................................................... 14  
CD/MP3/WMA Mode Operations ......................................................................................... 16  
Operations Common to Each Mode..................................................................................... 21  
9. OPERATIONS OF ACCESSORIES .................................................................................... 24  
CD Changer Operations ...................................................................................................... 24  
TV Operations ..................................................................................................................... 25  
10. TROUBLESHOOTING ........................................................................................................ 27  
11. ERROR DISPLAYS ............................................................................................................ 29  
12. SPECIFICATIONS .............................................................................................................. 30  
1. FEATURES  
Full dot display & Flip-down console  
MP3 and WMA compatible with ID3-TAG display  
Z-ENHANCER” sound customization & “MAGNA BASS EX” dynamic bass enhancement  
Be sure to unfold and read the next page.  
叫叭ゲ甶秨並綷弄下頁。  
반드시 다음 페이지를 펴서 읽으십시오.  
DXZ466MP  
2
 
2. CONTROLS / 北制 / 제어부  
MAIN UNIT / 主诀 / 메인유닛  
With the FLIP DOWN PANEL opened / FLIP DOWN PANEL (陆秨面狾)砆  
ゴ秨時 / 플립다운 패널이 열린 상태  
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.  
猔種: 綷弄各彻時叫叭ゲ甶秨此頁並綷弄玡面的瓜。  
주: 반드시 이 페이지를 펴서 각 장을 읽을 때 앞면 도표를 참고하십시오.  
DXZ466MP  
3
 
3. BUTTON TERMINOLOGY  
Note:  
• Be sure to read this chapter referring to the front diagrams of chapter “2. CONTROLS” on page 3.  
Names of the Buttons and their Functions  
[
]
[
]
OPEN button  
BND button  
[
]
• Deeply push in OPEN button to unlock the flip  
down panel.  
• Switch the band, or seek tuning or manual tuning  
while in the radio mode.  
• Play a first track while in the CD/MP3/WMA  
mode.  
Press and hold the button for 1 second or longer  
to perform multi-session.  
[
]
ADJ button  
• Press the button to switch to the ADJ mode.  
• Press the button to change the character.  
[
]
• Perform preset scan while in the radio mode.  
Press and hold the button for 2 seconds or  
longer to perform auto store.  
button  
[
] [  
]
UP , DN buttons  
(
)
• Select the Folder. MP3/WMA disc only  
• Play or pause a CD while in the CD/MP3/WMA  
mode.  
[
]
RDM button  
• Perform random play while in the CD/MP3/WMA  
mode.  
[
]
SENSOR  
• Receiver for remote control unit.  
• Operating range: 30° in all directions.  
• Press and hold the button for 1 second or longer  
to perform folder random play while in the MP3/  
WMA mode.  
[
]
ISR button  
• Recall ISR radio station in memory.  
[
]
RPT button  
• Repeat play while in the CD/MP3/WMA mode.  
• Press and hold for 2 seconds or longer: Store  
(
current station into ISR memory radio mode  
)
only .  
• Press and hold the button for 1 second or longer  
to perform folder repeat play while in the MP3/  
WMA mode.  
[
]
SCN button  
[ ]  
D button  
• Perform scan play for 10 seconds of each track  
while in the CD/MP3/WMA mode.  
(
• Switch the display indication Main display, Title  
)
display .  
• Press and hold the button for 1 second or longer  
to perform folder scan play while in the MP3/  
WMA mode.  
• Press and hold the button for 1 second or longer  
to enter the display adjustment mode.  
[ ]  
Z button  
[
]
DIRECT buttons  
• Press the button to select one of the 3 types  
of sound characteristics already stored in  
memory.  
• Store a station into memory or recall it directly  
while in the radio mode.  
[
]
SRC button  
• Press the button to turn on the power.  
[ ]  
T button  
• Press the button to input a title in the Radio  
mode.  
• Press and hold the button for 1 second or longer  
to turn off the power.  
• Press the button to input a title in the CD  
mode.  
• Switch the operation mode among the radio  
mode, etc.  
• Press the button to switch the user titles or track  
titles, while in the CD/MP3/WMA mode.  
[
]
ROTARY knob  
• Adjust the volume by turning the knob clockwise  
or counterclockwise.  
• Use the knob to perform various settings.  
• Press the button to scroll the title during the CD-  
text play, while in the CD/MP3/WMA mode.  
DXZ466MP  
4
 
Names of the Buttons and their Functions  
[
A-M button  
• Press the button to switch to the audio mode.  
bass/treble, balance/fader  
• Press and hold for 1 second or longer to turn on  
or off the M-B EX mode.  
]
[
]
,
lever  
• Select a station while in the radio mode or select  
a track when listening to a CD. This lever is used  
to make various settings.  
(
)
• Press the lever upward or downward and hold  
in position for 1 second or longer to enter the  
fast-forward or fast-backward mode.  
[
• Eject a CD when it is loaded into the unit.  
]
button  
[
CD SLOT  
• CD insertion slot.  
]
Major Button Operations when external equipment is  
connected to this unit  
[
]
SCN button  
• Perform scan play for 10 seconds of each track.  
When the CD/DVD changer is  
connected  
For details, see the section “CD changer opera-  
tions”. For the DVD changer, refer to the Ownerʼs  
Manual provided with the DVD changer.  
Press and hold the button for 1 second or longer  
to perform disc scan play.  
[
• Select a track when listening to a disc.  
]
,
lever  
[
]
• Play or pause a CD, DVD.  
button  
• Press the lever upward or downward and hold  
in position for 1 second or longer to enter the  
fast-forward or fast-backward mode.  
[ ]  
D button  
(
• Press the button to display the title Main display,  
).  
Title display, Clock display  
• Press and hold the button for 1 second or longer  
to enter the display adjust mode.  
When the TV is connected  
For details, see the section “TV Operations”.  
[
]
button  
[ ]  
T button  
• Perform preset scan while in the TV mode.  
• Press the button switches the user titles or track  
titles, etc. while in the CD changer mode.  
Press and hold the button for 2 seconds or  
longer to perform auto store.  
• Press and hold the button for 1 second or longer  
to input a title in the CD changer mode.  
[
• Switch the band.  
]
BND button  
• Press the button to scroll the title during CD-text  
play.  
Press and hold the button for 1 second or longer  
to switch to the seek tuning or manual mode.  
[
• Move the next disc in increasing order.  
]
BND button  
[
]
DIRECT buttons  
• Store a station into memory or recall it directly.  
[
• Select the disc.  
] [  
]
UP , DN buttons  
[
• Press the button to switch to the ADJ mode.  
]
ADJ button  
[
]
RDM button  
• Press and hold the button for 1 second or  
longer to switch to the TV picture mode or VTR  
external picture mode.  
• Perform random play. Press and hold the button  
for 1 second or longer to perform disc random  
play.  
(
)
[
]
,
lever  
[
]
RPT button  
• Select a station.  
• Perform repeat play. Press and hold the button  
for 1 second or longer to perform disc repeat  
play.  
DXZ466MP  
5
 
Display Items  
LCD Screen  
In extreme cold, the screen movement may slow down and the screen may darken, but this is normal.  
The screen will recover when it returns to normal temperature.  
DXZ466MP  
6
 
4. PRECAUTIONS  
1. When the inside of the car is very cold and  
the player is used soon after switching on the  
heater moisture may form on the disc or the  
optical parts of the player and proper playback  
may not be possible. If moisture forms on the  
disc, wipe it off with a soft cloth. If moisture  
forms on the optical parts of the player, do  
not use the player for about one hour. The  
condensation will disappear naturally allowing  
normal operation.  
2. Driving on extremely bumpy roads which  
cause severe vibration may cause the sound  
to skip.  
3. This unit uses a precision mechanism.  
Even in the event that trouble arises, never  
open the case, disassemble the unit, or  
lubricate the rotating parts.  
CAUTION  
!
USE OF CONTROLS, ADJUSTMENTS, OR PERFORMANCE OF PROCEDURES OTHER THAN  
THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.  
THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE  
EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.  
INFORMATION FOR USERS:  
CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFAC-  
TURER WILL VOID THE WARRANTY.  
DXZ466MP  
7
 
5. HANDLING COMPACT DISCS  
This unit has been designed specifically for play-  
Note on compact discs  
Never stick labels on the surface of the compact  
disc or mark the surface with a pencil or pen.  
back of compact discs bearing the  
mark. No other discs can be played.  
or  
To remove the compact disc from its storage case,  
press down on the center of the case and lift the  
disc out, holding it carefully by the edges.  
Do not use any solvents such as commercially  
available cleaners, anti-static spray, or thinner to  
clean compact discs.  
Always handle the compact disc by the edges.  
Never touch the surface.  
To remove fingermarks and dust, use a soft cloth,  
and wipe in a straight line from the center of the  
compact disc to the circumference.  
Do not use compact discs that have large scratch-  
es, are misshapen, or cracked, etc. Use of such  
discs will cause misoperation or damage.  
New discs may have some roughness around  
the edges. The unit may not work or the sound  
may skip if such discs are used. Use a ball-point  
pen, etc. to remove roughness from the edge of  
the disc.  
Do not expose compact discs to direct sunlight or  
any heat source.  
Note:  
Do not use commercially available CD protection sheets or discs equipped with stabilizers, etc. These  
may get caught in the internal mechanism and damage the disc.  
DXZ466MP  
8
 
(
)
6. DCP Detachable Control Panel  
The control panel can be detached to prevent  
theft. When detaching the control panel, store it  
CAUTION  
!
(
)
in the DCP Detachable Control Panel case to  
prevent scratches.  
Be sure to close the HOLD FLAP for safety  
when removing the DCP.  
We recommend taking the DCP with you when  
leaving the car.  
Attaching the DCP  
1. Insert the right side of the DCP into the main  
unit.  
Removing the DCP  
[
2. Insert the left side of the DCP to attach into  
the main unit.  
]
1. Press the SRC button for 1 second or longer  
to switch off the power.  
[
]
2. Press in the OPEN button.  
If the flip down panel does not open fully, gently  
open it with your hand.  
CAUTION  
!
• The DCP can easily be damaged by shocks.  
After removing it, be careful not to drop it or  
subject it to strong shocks.  
• If the FLIP DOWN PANEL is kept open, the  
DCP may drop due to vibration of the car.  
This result in damage to the DCP. So close  
the FLIP DOWN PANEL or remove the DCP  
to store into the case.  
• The connector connecting the main unit and  
the DCP is an extremely important part. Be  
careful not to damage it by pressing on it  
with fingernails, pens, screwdrivers, etc.  
3. Pull the DCP toward you and remove it.  
4. Close the HOLD FLAP.  
Note:  
• If the DCP is dirty, wipe off the dirt with a soft, dry  
cloth only.  
DXZ466MP  
9
 
7. REMOTE CONTROL  
Inserting the Battery  
Notes:  
1. Turn over the remote control unit and slide the  
cover in the direction indicated by the arrow in  
the illustration.  
Misuse may result in rupture of the battery, producing  
leakage of fluid and resulting in personal injury or  
damage to surrounding materials.Always follow these  
safety precautions:  
• Use only the designated battery.  
• When replacing the battery, insert properly, with  
(
)
2. Insert the battery CR2025 into the insertion  
(+)  
guides, with the printed side  
upwards.  
facing  
3. Press the battery in the direction indicated by the  
arrow so that it slides into the compartment.  
+
/- polarities oriented correctly.  
• Do not subject battery to heat, or dispose of in fire or  
water. Do not attempt to disassemble the battery.  
• Dispose of used batteries properly.  
4. Replace the cover and slide in until it clicks  
into place.  
DXZ466MP  
10  
 
Functions of Remote Control Unit Buttons  
Mode  
Button  
CD Changer  
DVD Changer  
CD/MP3/WMA  
TV  
Radio  
[
]
Press the button to power on.  
Press and hold the button for 1 second or longer: Power off.  
Switch among radio, CD/MP3/WMA, AUX, CD changer, DVD changer and TV.  
SRC  
[
]
Switch reception  
band.  
Play the first track.  
Top play.  
Move the next disc in Switch reception  
increasing order.  
BND  
band.  
(
)
Increase and decrease volume in all modes .  
[
]
[
]
,
[
]
[
]
,
Move preset  
channels up and  
down.  
Move tracks up and down.  
Press and hold the button for 1 second or  
longer: Fast-forward/fast-backward.  
Move preset  
channels up and  
down.  
[
]
No function.  
Switch between playback and pause.  
No function.  
[
]
MUTE  
Turn mute on and off.  
[
]
ISR  
Recall ISR radio station in memory.  
Press and hold for 2 seconds or longer: Store current station into ISR memory radio mode  
(
)
only .  
[
]
Switch among main display, title display.  
DISP  
[
]
Preset scan.  
Scan play.  
Scan play.  
Preset scan.  
SCN  
Press and hold the  
button for 2 seconds  
or longer: Auto store.  
Press and hold the  
button for 2 seconds  
or longer: Auto store.  
Press and hold the  
button for 1 second  
or longer to perform  
Press and hold the  
button for 1 second  
or longer: Disc scan  
folder scan play while play.  
in the MP3/WMA  
mode.  
[
]
RPT  
No function.  
Repeat play.  
Repeat play.  
No function.  
Press and hold the  
button for 1 second  
or longer to perform  
folder repeat play  
while in the MP3/  
WMA mode.  
Press and hold the  
button for 1 second  
or longer: Disc repeat  
play.  
[
]
No function.  
Random play.  
Random play.  
Switch between TV  
and VTR.  
RDM  
Press and hold the  
button for 1 second  
or longer to perform  
folder random play  
while in the MP3/  
WMA mode.  
Press and hold the  
button for 1 second or  
longer: Disc random  
play.  
Some of the corresponding buttons on the main unit and remote control unit have different functions.  
DXZ466MP  
11  
 
8. OPERATIONS  
Note:Be sure to read this chapter referring to the front diagrams of  
chapter “2. CONTROLS” on page 3.  
Basic Operations  
Note:  
• If the CD mode is selected when no disc is inserted,  
the display shows “NO DISC”.  
! CAUTION  
Be sure to lower the volume before switching  
off the unit power or the ignition key. The  
unit remembers its last volume setting. If you  
switch the power off with the volume up, when  
you switch the power back on, the sudden loud  
volume may hurt your hearing and damage  
the unit.  
Switching the display  
[ ]  
Press the D button to select the desired display.  
[ ]  
Each time you press the D button, the display  
switches in the following order:  
Main display  
Turning on/off the power  
Note:  
• Be careful about using this unit for a long time  
without running the engine. If you drain the carʼs  
battery too far, you may not be able to start the  
engine and this can reduce the service life of the  
battery.  
Title display  
[
1. Press the SRC button.  
]
2. The illumination and display on the unit  
light up. The unit automatically remem-  
bers its last operation mode and will au-  
tomatically switch to display that mode.  
In the case of a user title, only the top level is  
displayed.  
[
]
3. Press and hold the SRC button for 1 second  
or longer to turn off the power for the unit.  
In the case of radio/TV/AUX/DVD changer, the  
display cannot be switched to “Title Display”.  
Note:  
• System check  
Once selected, the preferred display becomes the  
display default. When a function adjustment such  
as volume is made, the screen will momentarily  
switch to that functionʼs display, then revert back  
to the preferred display several seconds after the  
adjustment.  
The first time this unit is turned on after the wire  
connections are completed, it must be checked  
what equipment is connected. When the power is  
turned on, the “SYSTEM CHECK” appears in the  
display, then the unit returns to the clock display  
mode. The system check starts within the unit.  
When the system check is complete, press the  
If the button operation is performed with the screen  
saver function on, the operation display corre-  
sponding to the button operation is shown for about  
30 seconds and the display returns to the screen  
saver display.  
[
]
SRC button again.  
Selecting a mode  
[
]
1. Press the SRC button to change the operation  
mode.  
For details, refer to the subsection “Turning the  
screen saver function on or off” in section “Opera-  
tions Common to Each Mode”.  
[
]
2. Each time you press the SRC button, the op-  
eration mode changes in the following order:  
When you have entered a title in a CD/MP3/WMA,  
it appears in the title display. If you have not en-  
tered a title, “NO TITLE” appears in the title display  
instead.  
Radio mode CD/MP3/WMA mode CD  
changer mode DVD changer mode TV  
mode AUX mode  
Radio mode...  
For information on how to enter a title, refer to the  
subsection “Entering titles” in section “Operations  
Common to Each Mode”.  
External equipment not connected with CeNET  
is not displayed.  
DXZ466MP  
12  
 
Basic Operations  
Adjusting the volume  
[
Adjusting the balance  
[
]
]
1. Press the front part of the ROTARY knob. The  
knob will pop up.  
1. Press the A-M button and select “BALANCE  
0”.  
[
]
[
]
2. Turning the ROTARY knob clockwise  
increases the volume; turning it counter-  
clockwise decreases the volume.  
2. Turning the ROTARY knob clockwise empha-  
sizes the sound from the right speaker; turning  
it counterclockwise emphasizes the sound from  
the left speaker.  
(
)
The volume level is from 0 minimum to 33  
(
)
maximum .  
The factory default setting is “0”.  
(
)
Adjustment range: L13 to R13  
3. When the adjustment is complete, press the  
Audio mode adjustments  
[
[
mode is reached.  
]
A-M button several times until the function  
]
1. Press the A-M button to select the adjustment  
mode. The mode switches as follows each time  
[
the A-M button is pressed:  
]
BASS TREBLE  
Previous mode  
BALANCE  
FADER  
Adjusting the fader  
[
]
1. Press the A-M button and select “FADER 0”.  
[
]
2. Turning the ROTARY knob to adjust the se-  
lected audio mode.  
[
]
2. Turning the ROTARY knob clockwise em-  
phasizes the sound from the front speakers;  
turning it counterclockwise emphasizes the  
sound from the rear speakers.  
(
)
BASS Bass  
Adjustment range : 6 to  
:
-
+
+
7
(
)
TREBLE Treble  
Adjustment range : 6 to  
:
The factory default setting is “0”.  
(
-
6
)
Adjustment range: F12 to R12  
(
)
BALANCE Balance :  
Adjustment range : L13 to R13  
3. When the adjustment is complete, press the  
]
[
mode is reached.  
A-M button several times until the function  
(
)
FADER Fader  
Adjustment range : F12 to R12  
:
The display returns to the previous mode 7  
seconds after the adjustment.  
Setting the Z-Enhancer  
This unit are provided with 3 types of sound tone  
effects stored in memory. Select the one you  
prefer.  
Adjusting the bass  
The factory default setting is “Z-ENHANCER  
OFF”.  
[
1. Press the A-M button and select “BASS 0”.  
]
[
]
2. Turning the ROTARY knob clockwise em-  
phasizes the bass; turning it counterclockwise  
attenuates the bass.  
[ ]  
Each time you press the Z button, the tone effect  
changes in the following order:  
OFF”  
EXCITE” “OFF” ...  
• BASS BOOST: bass emphasized  
BASS BOOST”  
IMPACT”  
The factory default setting is “0”.  
(
)
Adjustment range: -6 to +7  
• IMPACT  
• EXCITE  
: bass and treble emphasized  
Adjusting the treble  
[
: bass and treble emphasized  
mid de-emphasized  
]
1. Press the A-M button and select “TREBLE  
0”.  
• OFF  
: no sound effect  
[
]
2. Turning the ROTARY knob clockwise empha-  
sizes the treble; turning it counterclockwise  
attenuates the treble.  
The factory default setting is “0”.  
(
)
Adjustment range: -6 to +6  
DXZ466MP  
13  
 
Basic Operations  
Radio Mode Operations  
Adjusting MAGNA BASS EX  
Listening to the radio  
[
]
The MAGNA BASS EX does not adjust the low  
sound area like the normal sound adjustment  
function, but emphasizes the deep bass sound  
area to provide you with a dynamic sound.  
1. Press the SRC button and select the radio  
mode, then the radio will be on.  
[
]
2. To select a preset band, press the BND  
button, then select one of the preset bands  
such as FM1, FM2, FM3 or AM. Every time  
The factory default setting is off.  
[
]
the BND button is pressed, the display will  
change as:  
[
]
1. Press and hold the A-M button for 1 second or  
longer to turn on the MAGNA BASS EX effect.  
M-BASS EX ON” lights in the display.  
FM1 FM2 FM3 AM FM1...  
[
]
[
to tune in the desired station.  
]
2. Press and hold the A-M button for 1 second or  
longer to turn off the MAGNA BASS EX effect.  
M-BASS EX OFF” lights in the display.  
3. Press the  
,
lever upward or downward  
Seek tuning  
[
]
1. Press the BND button and select the desired  
(
)
band FM or AM .  
If “MANU” is lit in the display, press and hold  
[
]
the BND button for 1 second or longer.  
MANU” in the display goes off and seek tuning  
is now available.  
[
to start automatic station tuning.  
,
]
2. Press the  
lever upward or downward  
When the lever is pressed upward, search  
will be performing in the direction of higher  
frequencies. When the lever is pressed  
downward, search will be performed in the  
direction of lower frequencies.  
Manual tuning  
There are 2 ways available: Quick tuning and  
step tuning.  
When you are in the step tuning mode, the  
frequency changes one step at a time. In the quick  
tuning mode, you can quickly tune the desired  
frequency.  
[
]
1. Press the BND button and select the desired  
(
)
band FM or AM .  
If “MANU” is not lit in the display, press and hold  
]
[
the BND button for 1 second or longer.  
MANU” is lit in the display and manual tuning  
is now available.  
2. Tune into a station.  
DXZ466MP  
14  
 
Radio Mode Operations  
Press the  
Quick tuning:  
[
Recalling a preset station  
(
)
6-FM3, 6-AM exists to store individual radio  
stations in memory. Pressing the corresponding  
]
,
lever upward or downward  
A total of 24 preset positions 6-FM1, 6-FM2,  
and hold in position for 1 second or longer to begin  
station tuning.  
[
DIRECT button recalls the stored radio frequency  
automatically.  
]
Press the  
Step tuning:  
[
to perform manual tuning.  
]
,
lever upward or downward  
[
]
1. Press the BND button and select the desired  
(
)
band FM or AM .  
[
]
2. Press the corresponding DIRECT button to  
recall the stored station.  
Preset memory function  
Preset memory function can store up to 24  
stations:  
[
]
Press and hold one of the DIRECT buttons for  
2 seconds or longer to store that station into  
preset memory.  
six stations for each of FM1, FM2, FM3 and AM.  
Manual memory function  
[
(
)
Instant station recall ISR  
]
1. Press the BND button, to select a band you  
want to store in the memory.  
Instant station recall is a special radio preset that  
instantly accesses a favorite radio station at a  
touch of a button. The ISR function even operates  
with the unit in other modes.  
[
]
2. Press the  
station.  
,
lever to tune into a desired  
[
]
3. Press and hold one of the DIRECT button for  
2 seconds or longer to store the current station  
into preset memory.  
ISR memory  
1. Select the station that you wish to store in ISR  
memory.  
[
]
2. Press and hold the ISR button for 2 seconds  
or longer.  
Auto store  
Auto store is a function for storing up to 6 stations  
that are automatically tuned in sequentially.  
If 6 receivable stations cannot be received, a  
previously stored station remains unoverwritten  
at the memory position.  
Recalling a station with ISR  
[
]
In any mode, press the ISR button to turn on  
the radio function and tune the selected radio  
station. “ISR” and its frequency appear in the  
[
]
[
]
1. Press the BND button and select the desired  
display. Press the ISR button again to return to  
the previous mode.  
(
)
band FM or AM .  
[
]
2. Press and hold the PS/AS button for 2  
seconds or longer. The stations with good  
reception are stored automatically to the preset  
channels.  
Preset scan  
Preset scan receives the stations stored in preset  
memory in order. This function is useful when  
searching for a desired station in memory.  
[
1. Press the PS/AS button.  
]
2. When a desired station is tuned in, press the  
[
]
PS/AS button again to continue receiving that  
station.  
Note:  
[
]
• Be careful not to press and hold the PS/AS button  
for 2 seconds or longer, otherwise the auto store  
function is engaged and the unit starts storing sta-  
tions.  
DXZ466MP  
15  
 
CD/MP3/WMA Mode Operations  
(
Logical format File system  
)
What is MP3?  
MP3 is an audio compression method and  
classified into audio layer 3 of MPEG standards.  
This audio compression method has penetrated  
into PC users and become a standard format. This  
MP3 features the original audio data compression  
to about 12 percent of its initial size with a high  
quality sound. This means that about 10 music  
CDs can be recorded on a CD-R disc or CD-RW  
disc to allow a long listening time without having  
to change CDs.  
1. When writing MP3/WMAle on a CD-R disc or  
CD-RW disc, please select “ISO9660 level 1, 2  
or JOLIET or Romeo” as the writing software  
format. Normal play may not be possible if the  
disc is recorded on another format.  
2. The folder name and file name can be  
displayed as the title during MP3/WMA play  
but the title must be within 64 single byte  
(
alphabetical letters and numerals including  
)
an extension .  
3. Do not affix a name to a file inside a folder  
having the same name.  
What is WMA?  
WMA is the abbreviation of Windows Media  
Audio, an audio file format developed by Microsoft  
Corporation.  
Folder structure  
1. A disc with a folder having more than 8  
hierarchical levels will be impossible.  
Notes:  
(
• If you play a file with DRM Digital Rights Manage-  
)
ment for WMA remaining ON, no audio is output.  
Number of files or folders  
• Windows Media™, and the Windows® logo are  
trademarks, or registered trademarks of Microsoft  
Corporation in the United States and/or other  
countries.  
1. Up to 255 files can be recognized per folder.  
Up to 512 files can be played.  
2. Tracks are played in the order that they were  
(
recorded onto a disc. Tracks might not always  
)
be played in the order displayed on the PC.  
To disable DRM  
(
)
Digital Rights Management :  
1. When using Windows Media Player 8, click on  
TOOLS OPTIONS COPY MUSIC tab,  
3. Some noise may occur depending on the type  
of encoder software used while recording.  
then under COPY SETTINGS unclick the  
check box for PROTECT CONTENT. Then,  
reconstruct files.  
CD-DA/MP3/WMA selection on  
multi-session CD  
When a disc contains both normal CD type tracks  
and MP3/WMA tracks mixedly, you can select  
which type of the recorded tracks to play.  
2. When using Windows Media Player 9, click on  
TOOL OPTIONS MUSIC RECORD tab,  
then under Recording settings, unclick the  
Check box for RECORD PROTECTED  
MUSIC. Then, reconstruct files. Personally  
constructed WMA files are used at your own  
responsibility.  
Default value is “CD”.  
[
]
Each time you press and hold the BND button for  
1 second or longer, the mixed mode is switched  
between CD type or MP3/WMAtype. The following  
indication appears in the title display when  
switching the track type to be played.  
Precautions when creating MP3/WMA  
disc  
Usable sampling rates and bit rates:  
Display when  
CD type track  
is selected:  
1. MP3: Sampling rate 11.025 kHz-48 kHz,  
Bit rate: 8 kbps-320 kbps/VBR  
2. WMA: Bit rate 48 kbps-192 kbps  
Display when  
MP3/WMA  
File extensions  
type track is  
selected:  
Always add a file extension “.MP3” or “.WMA”  
to MP3 or WMAle by using single byte letters.  
If you add a file extension other than specified  
or forget to add the file extension, the file  
cannot be played  
DXZ466MP  
.
16  
 
CD/MP3/WMA Mode Operations  
[
]
1. Types of recording that can be played are as  
follows.  
2. Press the  
is ejected.  
button. Remove the disc after it  
3. Close the FLIP DOWN PANEL.  
Setting  
Set to CD Set to MP3/WMA  
Disc  
Notes:  
• Always close the FLIP DOWN PANEL once you  
take out the disc.  
Mixed with CD  
and MP3/WMA  
type tracks  
Play CD  
Play MP3/WMA  
• If you force a CD into before auto reloading, this  
can damage the CD.  
CD type track only  
Play CD  
Play CD  
MP3/WMA type  
track only  
Play MP3/ Play MP3/WMA  
WMA  
(
)
• If a CD 12 cm is left in the ejected position for 15  
(
seconds, the CD is automatically reloaded. Auto  
)
reload .  
2. After making these settings, remove the disc  
and then reinsert it.  
• 8 cm CDs are not auto reloaded. Be sure to remove  
it when ejected.  
3. When a mixed mode CD is loaded and CD is  
set, the track to be played first is MP3/WMA  
file data and no sound is heard.  
Listening to a disc already loaded  
in the unit  
Press the SRC button to select the CD/MP3/  
WMA mode.  
Note:  
• When playing a CCCD (Copy Control CD), set the  
setting to CD type. When this is set to MP3/WMA  
type, the CD cannot be played normally in some  
cases.  
[
]
When the unit enters the CD/MP3/WMA mode,  
play starts automatically.  
If there is no disc loaded, the indication “NO DISC”  
appears in the title display.  
Disc-In-Play function  
As long as the ignition key is turned to the ON  
or ACC position, this function allows you to turn  
the power to the unit and start playing the disc  
automatically when the disc is inserted even if the  
power is not turned on.  
[
The mode changes each time the SRC button is  
]
(
pressed. Modes are not displayed for equipment  
)
that is not connected.  
(
AUX Radio...  
)
Radio CD/MP3/WMA  
)
TV  
CD changer  
(
)
(
DVD changer  
! CAUTION  
• Do not try to put your hand or fingers in the  
disc insertion slot. Also never insert foreign  
objects into the slot.  
Loading a CD  
[
]
1. Press the OPEN button to access the CD  
SLOT behind the FLIP DOWN PANEL.  
• Do not insert discs where adhesive comes  
out from cellophane tape or a rental CD label,  
or discs with marks where cellophane tape  
or rental CD labels were removed. It may be  
impossible to extract these discs from the  
unit and they may cause the unit to break  
down.  
2. Insert a CD into the center of the CD SLOT  
with the labeled side facing up. The CD plays  
automatically after loading.  
Notes:  
• Never insert foreign objects into the CD SLOT.  
• If the CD is not inserted easily, there may be an-  
other CD in the mechanism or the unit may require  
service.  
Backup eject function  
[
if the power to the unit was not turned on.  
]
• Discs not bearing the  
CD-ROMs cannot be played by this unit.  
or  
mark and  
Just pressing the  
button ejects the disc even  
• Some CDs recorded in CD-R/CD-RW mode may  
not be usable.  
[
]
1. Press the OPEN button to open the FLIP  
DOWN PANEL.  
Note:  
• If the FLIP DOWN PANEL will not open far enough,  
open it gently with your hand.  
DXZ466MP  
17  
 
CD/MP3/WMA Mode Operations  
Notes:  
Loading 8 cm CD  
No adapter is required to play an 8 cm CD.  
• If the CD playing is not a CD-text data or no user  
title has been input, “ U NO TITLE” appears in the  
display.  
Insert the 8 cm CD into the center of the insertion  
slot.  
• If MP3/WMA disc is not input TAG, “ NO TAG”  
appears in the display.  
3. Close the FLIP DOWN PANEL.  
• For MP3, supports ID3 Tags V2.3/2.2/1.1/1.0.  
Tag displays give priority to V2.3/2.2  
! CAUTION  
Be careful not to catch your hand or fingers  
while closing the FLIP DOWN PANEL.  
• In the case of album Tags for WMA, the information  
written into the extension header is displayed.  
Notes:  
• If the FLIP DOWN PANEL does not open fully,  
gently open with your hand.  
• Only ASCII characters can be displayed in Tags.  
Title display mode  
1. There are 5 types of display for the Title Display  
mode.  
• After loading a CD, always close the FLIP DOWN  
PANEL.  
[ ]  
2. To select the next type, press the T button for  
less than 1 second.  
Pausing play  
[
appears in the display.  
]
1. Press the  
button to pause play. “PAUSE”  
The arrangement is shown below.  
After 2 seconds  
[
]
2. To resume CD play, press the  
again.  
button  
Displaying CD titles  
This unit can display title data for CD-text/MP3/  
WMA disc and user titles input with this unit.  
[ ]  
1. Press the D button to display the title.  
[ ]  
2. Each time you press the T button, the title  
display changes in the following order:  
3. The displayed item can be scrolled by pressing  
[ ]  
the T button for more than 1 second.  
CD-TEXT data  
4. If a MP3/WMA file does not support for ID3  
TAG, the display will show “NO TAG”.  
5. If a MP3/WMAle encode with ID3 TAG header  
but no consist of any TAG information, the  
display will show nothing.  
Notes:  
• The folder name will be displayed as “ROOT” which  
the file allocates in the root folder.  
MP3/WMA disc  
• The MP3 player decodes each file ID3 TAG ver 2  
by default, if ID3 TAG ver 2 is unavailable, ID3 TAG  
ver 1 will be decoded.  
(
)
• UNICODE ID3 Chinese, Japanese and etc is not  
supported.  
DXZ466MP  
18  
 
CD/MP3/WMA Mode Operations  
Selecting a track  
Example of a mediumʼs folder/file hierarchy  
• Track-up  
1. Press the  
[
beginning of the next track.  
]
lever upward to move to the  
[
]
2. Each time the  
lever is pressed upward,  
playback proceeds to another track in the  
advancing direction.  
• Track-down  
1. Press the  
[
beginning of the current track.  
]
lever downward to move the  
[
to the beginning of the previous track.  
]
2. Press the  
lever downward twice to move  
Fast-forward/fast-backward  
Fast-forward  
[
]
Press the  
lever upward and hold in position for  
1 second or longer.  
Press the  
Fast-backward  
[
tion for 1 second or longer.  
]
lever downward and hold in posi-  
For MP3/WMA discs, it takes some time until the  
start of searching and between tracks. In addition,  
the playing time may have a margin of error.  
Folder select  
This function allows you to select a folder  
containing MP3/WMA files and start playing from  
the first track in the folder.  
MP3/WMA playing order  
When selected for play folder up down functions,  
files and folders are accessed in the order in which  
they were written by the CD-ROM writer. Because  
of this, the order in which they are expected to  
be played may not match the order in which they  
are actually played. You may be able to set the  
order in which MP3/WMA are to be played by  
writing them onto a medium such as a CD-R with  
their file names beginning with play sequence  
numbers such as “01” to “99”, depending on your  
CD writer.  
[
1. Press the DN or the UP button.  
]
[
]
[
]
Press the DN button to move the previous  
[
]
folder. Press the UP button to move the next  
folder.  
For example, a medium with the following folder/  
file hierarchy is shown below.  
DXZ466MP  
19  
 
CD/MP3/WMA Mode Operations  
[
]
Press the UP button while in the final folder  
to shift to the first folder.  
Random play  
This function allows you to play all tracks recorded  
on a disc in a random order.  
Folder without an MP3/WMA file is not  
selectable.  
[
]
1. Press the RDM button to perform random  
play.  
[
,
]
2. To select a track, press the  
upward or downward.  
lever  
RDM” appears in the display.  
Folder random play  
Top function  
The top function resets the CD player to the first  
This function allows you to play all the tracks of  
all the folders recorded on an MP3/WMA disc in  
a random order.  
[
]
track of the disc. Press the BND button to play  
(
)
the first track Track No. 1 on the disc.  
[
]
1. Press and hold the RDM button for 1 second  
or longer to perform folder random play.  
In case of MP3/WMA, the first track of a folder being  
played will be returned.  
RDM” appears in the display.  
Other various play functions  
To cancel play  
Scan play  
This function allows you to locate and play the first  
10 seconds of all the tracks recorded on a disc.  
1. Press the operating button previously  
selected.  
[
]
1. Press the SCN button to perform scan play.  
SCN” appears in the display.  
Scan play starts from the next track after the  
track currently being played.  
Folder scan play  
This function allows you to locate and play the first  
10 seconds of the first track of all the folders on  
an MP3/WMA disc.  
[
]
1. Press and hold the SCN button for 1 second  
or longer to perform folder scan play.  
SCN” appears in the display.  
Folder scan play starts from the next track  
after the track currently being played.  
Repeat play  
This function allows you to play the current track  
repeatedly.  
[
]
1. Press the RPT button to perform repeat play.  
RPT” appears in the display.  
Folder repeat play  
This function allows you to play a track currently  
being played in the MP3/WMA folder repeatedly.  
[
]
1. Press and hold the RPT button for 1 second  
or longer to perform folder repeat play.  
RPT” appears in the display.  
DXZ466MP  
20  
 
Operations Common to Each Mode  
[
]
3-1. Turn the ROTARY knob to select the setting.  
To change display setting  
[ ]  
[
]
Each time you turn the ROTARY knob,  
the setting changes in the following order:  
1. Press and hold the D button for 1 second or  
longer to switch to the adjustment selection  
display.  
Pattern OFF” “Pattern SS” “Pattern  
MESSAGE”  
[
,
]
to select the “item name”.  
2. Press the  
lever upward or downward  
Entering MESSAGE INFORMATION  
CLOCKPush ENT  
SCREEN SVR Push ENT  
Message up to 30 characters long can be stored  
in memory and displayed as a type of screen  
saver setting.  
MSG INPUT Push ENT  
AUTO SCROLL”  
CONTRAST”  
DIMMER”  
The factory default setting is “WELCOME TO  
CLARION”.  
[
]
3. Turn the ROTARY knob to select the “desired  
setting value”.  
2-1. Select “ MSG INPUT Push ENT ”.  
[
]
[ ]  
After completing settings, press the D button  
to return to the previous mode.  
3-1. Press the  
button.  
[
]
3-2. Press and hold BND button for 1 second or  
longer to clear the old message.  
Setting the clock  
[
ward to move the cursor.  
]
3-3. Press the  
,
lever upward or down-  
2-1. Select “ CLOCK Push ENT ”.  
[
[
]
3-1. Press the  
3-2. Press the  
button.  
[
]
3-4. Press the BND button to select a character.  
[
]
Each time you press the BND button, the  
character changes in the following orders:  
]
,
lever upward or  
downward to select the hour or the minute.  
Capital letters Small letters Numbers/  
Symbols Umlaut Capital letters...  
[
]
3-3. Turn the ROTARY knob to set the correct  
time.  
[
]
3-5. Turn the ROTARY knob to select the desired  
character.  
The clock is displayed in 12-hour format.  
[
]
3-4. Press the  
memory.  
button to store the time into  
3-6. Repeat step 3-3 to 3-5 to enter up to 30  
characters for message.  
Note:  
[
]
3-7. Press and hold the  
button for 2 seconds  
You cannot set the clock when it is displayed with  
only the ignition on. If you drain or remove the carʼs  
battery or take out this unit, the clock is reset. While  
setting the clock, if another button or operation is  
selected, the clock set mode is canceled.  
or longer to store the message in memory  
and cancel input message mode.  
[
]
Press and hold the BND button for 1 second  
or longer to cancel the input message. Then  
[
]
press and hold the  
button for 2 seconds  
Turning the screen saver function on or  
off  
or longer to store the message and the mes-  
sage return to default setting.  
This unit is provided with the screen saver function  
which allows you to show various kinds of patterns  
and characters in the operation status indication  
area of the display in a random order. You can turn  
on and off this function.  
• Setting the method for title scroll  
Set how to scroll in CD-TEXT, MP3/WMA title.  
The factory default setting is “ON”.  
2-1. Select “ AUTO SCROLL”.  
If the button operation is performed with the  
screen saver function on, the operation display  
corresponding to the button operation is shown  
for about 30 seconds and the display returns to  
the screen saver display.  
[
]
3-1. Turn the ROTARY knob to select “ON” or  
OFF”.  
• ON:  
To scroll automatically.  
The factory default setting is “Pattern SS”.  
• OFF:  
To scroll just 1 time when the title was changed or the  
Push ENT  
2-1. Select “ SCREEN SVR  
”.  
[ ]  
T button was pressed for 1 second or longer.  
DXZ466MP  
21  
 
Operations Common to Each Mode  
Adjusting the display scroll speed  
Anti-theft indicator  
The red Anti-theft indicator is a function for pre-  
venting theft. When the DCP is removed from the  
unit, this indicator blinks.  
This feature allows you to slow down the scroll  
speed when the scroll speed is too fast, making it  
difficult to view the screen.  
The factory default setting is “OFF”.  
2-1. Select “ BLINK LED”.  
The factory default setting is “SPEED 3”  
2-1. Select “ SCRL SPEED”.  
[
]
3-1. Turn the ROTARY knob to select “ON” or  
OFF”.  
[
]
3-1.Turn the ROTARY knob to select the setting.  
This setting item can be adjusted within the  
range SPEED 1 to SPEED 6.  
• Setting the external amplifier  
The factory default setting is “OFF”.  
Adjust this setting item while viewing how the  
appearance of the display changes.  
2-1. Select “ AMP CANCEL”.  
[
]
3-1. Turn the ROTARY knob to select “ON” or  
OFF”.  
Dimmer control  
You can setting the dimmer control “ON” or “OFF”.  
The factory default setting is “ON”.  
• ON:  
Use with connected AMP.  
2-1. Select “ DIMMER”.  
• OFF:  
[
]
3-1. Turn the ROTARY knob to select “ON” or  
OFF”.  
Use with inside AMP.  
Selecting AUX IN sensitivity  
Adjusting the display contrast  
Make the following settings to select the sensi-  
tivity when sounds from external devices con-  
nected to this unit are difficult to hear even after  
adjusting the volume.  
You can adjust the display contrast to match the  
angle of installation of the unit.  
The factory default setting is “08”.  
(
The factory default setting is “MID”.  
2-1. Select “ AUX SENS”.  
)
Adjustment level: 01 to 16  
2-1. Select “ CONTRAST”.  
[
]
3-1. Turn the ROTARY knob to select “LOW”,  
MID” or “HIGH”.  
[
]
3-1. Turn the ROTARY knob to adjust the  
contrast.  
Triggered audio mute for cellular  
telephones  
To change other settings  
]
This unit requires special wiring to mute the audio  
signal automatically when a cellular telephone  
rings in the car.  
[
1. Press the ADJ button to switch to the  
adjustment selection display.  
[
ward to select the “item name”.  
,
]
2. Press the  
lever upward or down-  
This function is not compatible with all cellular  
telephones. Contact your local authorized Clarion  
dealer for information on proper installation and  
compatibility.  
[
,
]
Each time the  
lever is pressed  
up/down, the item display changes in the  
following order:  
BLINK LED”  
AUX SENS”  
AMP CANCEL”  
SYSTEM CHECKPush ENT  
Performing a system check  
This function allows you to perform a system check  
from the adjust mode when required.  
[
]
3. Turn the ROTARY knob to select the “desired  
setting item”.  
2-1. Select “ SYSTEM CHECK Push ENT ”.  
[
After completing settings, press the ADJ but-  
]
[
]
3-1. Press and hold the  
or longer.  
button for 1 second  
ton to return to the previous mode.  
SYSTEM CHECK” appears in the display,  
then the unit returns to the previous  
operation mode.  
DXZ466MP  
22  
 
Operations Common to Each Mode  
Entering titles  
Clearing titles  
Titles up to 10 characters long can be stored in  
memory and displayed for CD, CD changer andTV  
stations. The number of titles that can be entered  
for each mode are as follows.  
1. Select and play a CD in the CD changer or tune  
in to a TV station or TUNER for which you want  
to clear the title.  
[
]
2. Press the  
display.  
D
button and display the title  
Mode  
Number of titles  
50 titles  
[ ]  
3. Press and hold the T button for 1 second or  
longer.  
CD mode  
TV mode  
Tuner mode  
20 titles  
The display switches to the title input display.  
30 titles  
[
]
4. Press and hold the BND button for 1 second  
or longer.  
CD changer mode  
DCZ625 connected  
CDC655Tz connected  
Number of titles  
100 titles  
All characters in the title disappear.  
100 titles  
[
]
5. Press and hold the  
button for 2 seconds  
or longer to clear the title and cancel title input  
mode.  
[
]
1. Press the SRC button to select the mode you  
(
want to enter a title TUNER, CD, CD changer  
)
or TV .  
AUX function  
2. Select and play a CD in the CD changer or tune  
in to a TV station or TUNER for which you want  
to enter the title.  
This system has an external input jack so you  
can listen to sounds and music from external de-  
vices connected to this unit.  
[
]
3. Press the  
display.  
D
button and display the title  
[ ]  
4. Press and hold the T button for 1 second or  
longer.  
The display switches to the title input display.  
[
to move the cursor.  
]
5. Press the  
,
lever upward or downward  
[
]
6. Press the BND button to select a character.  
[
Each time you press the BND button, the  
character changes in the following order:  
]
Capital letters Small letters Numbers/  
Symbols Umlaut Capital letters...  
[
]
7. Turn the ROTARY knob to select the desired  
character.  
8. Repeat steps 5 to 7 to enter up to 10 characters  
for the title.  
[
]
9. Press and hold the  
button for 2 seconds  
or longer to store the title into memory and  
cancel title input mode.  
DXZ466MP  
23  
 
9. OPERATIONS OF ACCESSORIES  
CD Changer Operations  
Note:  
Displaying CD titles  
• The following operations are the same as for CD  
This unit can display title data for CD-text CDs and  
mode:  
user titles input with this unit.  
Pause  
Title data for CD-text CDs can be displayed with  
this unit only when it is connected to CDC655Tz.  
Track selection  
Fast-forward/fast-backward  
Scan play  
[ ]  
1. Press the D button to display the title.  
[ ]  
2. Each time you press the T button, the title  
display changes in the following order:  
Repeat play  
Random play  
(
See “CD/MP3/WMA Mode Operations” page 16-  
)
20 for details.  
CD changer functions  
When an optional CD changer is connected  
through the CeNET cable, this unit controls all CD  
changer functions. This unit can control a total of  
2 changers.  
Notes:  
• If the CD playing is not a CD-text CD or no user  
U
title has been input, “ NO TITLE” appears in the  
display.  
[
]
Press the SRC button and select the CD changer  
mode to start play. If 2 CD changers are con-  
[
]
nected, press the SRC button to select the CD  
changer for play.  
• If a CD-text CD is not input its disc title or a track  
title, “  
O
the display.  
NO TITLE” or “ NO TITLE” appears in  
If “NO MAGAZINE” appears in the display, in-  
sert the magazine into the CD changer. “DISC  
CHECK” appears in the display while the player  
(
loads checks the magazine.  
)
Procedure to scroll a title  
Set “AUTO SCROLL” to “ON” or “OFF”.  
If “NO DISC” appears in the display, eject  
the magazine and insert discs into each slot.  
Then, reinsert the magazine back into the CD  
changer.  
(
The factory default setting is “ON”. Refer to the  
subsection “Turning the screen saver function  
on or off” in section “Operation common to  
Note:  
• Some CDs recorded in CD-R/CD-RW mode may  
not be usable.  
)
each mode”.  
• When set to “ON”  
The title is automatically kept scrolling.  
! CAUTION  
• When set to “OFF”  
To scroll just 1 time when the title was changed or the  
CD-ROM discs cannot be played from every CD  
changer, itʼs depended on the model.  
[ ]  
T button was pressed for 1 second or longer.  
Selecting a CD  
[
[
]
]
Press the UP or DN button to select the desired  
disc.  
If a CD is not loaded in a slot of magazine, press-  
[
ing the UP or DN button can not work.  
]
[
]
DXZ466MP  
24  
 
TV Operations  
CD Changer Operations  
Note:  
• The following operations are performed the same  
as for radio mode:  
Other various play functions  
Disc scan play  
Disc scan play locates and plays the first 10  
seconds of the first track on each disc in the  
currently selected CD changer. This function  
continues automatically until it is cancelled.  
Channel selection  
Storing channels in memory  
Calling channels from memory  
Auto store  
Disc scan play is useful when you want to select a  
desired CD.  
Preset scan  
(
)
See “Radio Mode Operations” page 14-15 for  
details.  
[
]
1. Press and hold the SCN button for 1 second  
or longer. “D.SCN” appears in the display and  
disc scan play starts.  
TV tuner functions  
Disc repeat play  
When an optional TV tuner is connected through  
the CeNET cable, this unit controls all TV tuner  
functions. To watch TV requires a TV tuner and  
monitor.  
After all the tracks on the current disc have been  
played, disc repeat play automatically replays the  
current disc over from the first track.  
This function continues automatically until it is  
cancelled.  
Watching a TV  
[
[
]
1. Press and hold the RPT button for 1 second  
or longer. “D.RPT” appears in the display and  
disc repeat play starts.  
]
1. Press the SRC button and select the TV  
mode.  
[
]
2. Press the BND button to select the desired  
(
)
TV band TV1 or TV2 . Each time the button is  
pressed, the input selection toggles between  
TV1 and TV2.  
Disc random play  
The disc random play selects and plays individual  
tracks or discs automatically in no particular  
order.  
[
3. Press the  
to tune in the desired TV station.  
,
]
lever upward or downward  
This function continues automatically until it is  
cancelled.  
Watching a video  
The TV tuner has a VTR input terminal to which 1  
[
]
1. Press and hold the RDM button for 1 second  
or longer. “D.RDM” appears in the display and  
disc random play starts.  
external device can be connected. Connect a 12  
(
)
V video cassette player VCP or videocassette  
(
)
recorder VCR to the TV tuner input terminal.  
To cancel play  
[
]
1. Press the operating button previously  
selected.  
1. Press and hold the ADJ button for 1 second  
or longer to select VTR.  
2. To return to the TV broadcast, press and hold  
]
[
the ADJ button for 1 second or longer.  
Setting the TV area  
(
When you select the TV area TV reception  
)
area , the TV tuner area setting changes.  
[
]
1. Press the ADJ button to switch to the  
adjustment selection display.  
[
]
2. Press the  
,
lever upward or downward  
to select “ TV AREA Push ENT ”.  
[
]
3. Press the  
button.  
DXZ466MP  
25  
 
TV Operations  
[
]
4. Turn the ROTARY knob to select the reception  
area.  
[
]
5. Press the  
button.  
[
]
6. Press the ADJ button to return to the previous  
mode.  
Setting the TV diver  
You can change the reception setting for the TV  
antenna connected to the TV tuner.  
[
]
1. Press the ADJ button to switch to the  
adjustment selection display.  
[
,
]
to select “ TV DIVER”.  
2. Press the  
lever upward or downward  
[
]
3. Turn the ROTARY knob clockwise to set to  
ON” or counterclockwise to set to “OFF”.  
• ON:  
Sets the diver setting to ON.  
• OFF:  
Sets the diver setting to OFF.  
[
]
4. Press the ADJ button to return to the previous  
mode.  
DXZ466MP  
26  
 
10.TROUBLESHOOTING  
Problem  
Cause  
Measure  
Power does not turn on. Fuse is blown.  
(
Replace with a fuse of the same amperage.  
If the fuse blows again, consult your store of  
purchase.  
)
No sound is produced  
Incorrect wiring.  
Consult your store of purchase.  
No sound output when  
operating the unit with  
amplifiers or power  
antenna attached.  
Power antenna lead is  
shorted to ground or  
excessive current is  
required for remote-on  
the amplifiers or power  
antenna.  
1. Turn the unit off.  
2. Remove all wires attached to the power  
antenna lead. Check each wire for a possible  
short to ground using an ohm meter.  
3. Turn the unit back on.  
4. Reconnect each amplifier remote wire to  
the power antenna lead one by one. If  
the amplifiers turn off before all wires are  
attached, use an external relay to provide  
(
remote-on voltage excessive current  
)
required .  
[
]
Nothing happens when  
button are pressed.  
Display is not accurate.  
The microprocessor has  
malfunctioned due to  
noise, etc.  
Turn off the power, then press the OPEN  
button and remove the DCP.  
Press the reset button for about 2 seconds  
with a thin rod.  
DCP or main unit  
connectors are dirty.  
Wipe the dirt off with a soft cloth moistened  
with cleaning alcohol.  
No sound heard.  
The speaker protection  
circuit is operating.  
1. Turn down sound volume. Function can  
also be restored by turning the power off  
and on again. (Speaker volume is reduced  
automatically when the speaker protection  
circuit operates).  
2. If the sound is muted again, consult our  
service department.  
DXZ466MP  
27  
 
Troubleshooting  
Problem  
Cause  
Measure  
No sound heard.  
MP3/WMA files are  
absent in a disc.  
Write MP3/WMA files onto the disc properly.  
Files are not recognized  
as an MP3/WMA file.  
Use MP3/WMA files encoded properly.  
File system is not  
correct.  
Use ISO9660 level 1, 2 or JOLIET or Romeo  
file system.  
Sound skips or is noisy.  
Disc is dirty.  
Clean the disc with a soft cloth.  
Disc is heavily scratched  
or warped.  
Replace with a disc with no scratches.  
Sound is cut or skipped. MP3/WMA files are not  
Use MP3/WMA files encoded properly.  
Noise is generated or  
noise is mixed with  
sound.  
encoded properly.  
Sound is bad directly  
Water droplets may  
Let dry for about 1 hour with the power on.  
after power is turned on. form on the internal lens  
when the car is parked  
in a humid place.  
Wrong filename  
File system is not  
correct.  
Use ISO9660 level 1, 2 or JOLIET or Romeo  
file system.  
DXZ466MP  
28  
 
11. ERROR DISPLAYS  
Error Display  
Cause  
Measure  
A DISC is caught inside the CD This is a failure of CD deckʼs mechanism and  
ERROR 2  
deck and is not ejected.  
consult your store of purchase.  
A DISC cannot be played due  
to scratches,etc.  
Replace with a non-scratched, non-warped-  
disc.  
ERROR 3  
ERROR 6  
A DISC is loaded upside-down  
inside the CD deck and does  
not play.  
Eject the disc then reload it properly.  
Error Display  
Cause  
Measure  
A CD inside the CD changer is This is a failure of CD changerʼs mechanism  
ERROR 2  
not loaded.  
and consult your store of purchase.  
A CD inside the CD changer  
cannot be played due to  
scratches, etc.  
Replace with a non-scratched, non-warped  
disc.  
ERROR 3  
ERROR 6  
A CD inside the CD changer  
cannot be played because it is  
loaded upside-down.  
Eject the disc then reload it properly.  
Error Display  
ERROR 2  
ERROR 3  
Cause  
Measure  
A DISC inside the DVD  
changer cannot be played.  
This is a failure of DVD mechanism and  
consult your store of purchase.  
A DISC cannot be played due  
to scratches, etc.  
Retry or replace with a non-scratched, non-  
warped-disc.  
A DISC inside the DVD chang- Eject the disc then reload it properly.  
er cannot be played because it  
is loaded upside-down.  
ERROR 6  
Parental level error.  
Region code error.  
Set the correct Parental level.  
ERROR P  
ERROR R  
Eject the disc and replace correct region code  
disc.  
DXZ466MP  
29  
 
12.SPECIFICATIONS  
FM tuner  
Frequency Range: 87.0 MHz to 108 MHz  
Audio  
Maximum Power Output: 208 W 52 W X 4 ch  
(
)
Usable Sensitivity: 11 dBf  
Continuous Average Power Output:  
17 W X 4, into 4 Ω, 20 Hz to 20 kHz,1%THD  
50 dB Quieting Sensitivity: 17 dBf  
Alternate Channel Selectivity: 75 dB  
(
)
Bass Control Action 100 Hz : ±14 dB  
(
Treble Control Action 10 kHz : ±14 dB  
)
(
Stereo Separation 1 kHz : 35 dB  
)
(
)
Line Output with A/C 1 kHz, 10 kΩ : 1.8 V  
±
Frequency Response 3 dB : 30 Hz to 15 kHz  
(
)
General  
Power Supply Voltage:  
AM tuner  
Frequency Range:  
(
)
14.4 V DC 10.8 V to 15.6 V allowable , nega-  
AM 531 kHz to 1629 kHz  
tive ground  
Usable Sensitivity: 25 μV  
Current Consumption: Less than 15 A  
(
Speaker Impedance: 4 Ω 4 Ω to 8 Ω allowable  
)
CD player  
System: Compact disc audio system  
(
Weight: 2.42 lb. 1.1 kg  
)
Dimensions:  
178 mm Width X 50 mm Height X 152 mm  
Depth  
Usable Discs: Compact disc  
±
Frequency Response: 10 Hz to 20 kHz 1 dB  
(
)
(
Signal-to-Noise Ratio: 85 dB 1 kHz IHF-A  
)
(
Dynamic Range: 80 dB 1 kHz  
)
Harmonic Distortion: 0.01%  
MP3  
Decode Format: MPEG 1,2 and 2.5 -Layer 3  
(
)
Sampling rate kHz : MPEG-1: 32,44.1,48  
MPEG-2: 16,22.05,24  
MPEG-2.5: 8,11.025,12  
Notes:  
• Specifications comply with JEITA Standards.  
(
)
Bit-rate kbps : 8, 16, 24, 32, 40, 48, 56, 64,  
80, 96, 112, 128, 144, 160, 192,  
224, 256, 320, VBR  
• Specifications and design are subject to change  
without notice for further improvement.  
CD-ROM Format: ISO9660 Level 1, 2, Romeo  
and Joliet  
• Please make sure when connecting external power  
amplifier, that you properly, to the car chassis,  
ground the amplifier.  
Folder Level Limit: 8 Level  
Folder Support: 255  
• If this is not done, severe damage to the source unit  
may happen.  
File Support: 512  
Folder Name: Maximum 64 bytes  
File Name: Maximum 64 bytes  
DXZ466MP  
30  
 

Cobra Electronics Marine Radio MR HH330 FLT EU User Manual
Craftsman Blower 3607969 User Manual
Crate Amplifiers Stereo Amplifier G130C XL User Manual
Creative Universal Remote FM Wired Remote User Manual
Cub Cadet Lawn Mower 18HP User Manual
CyberHome Entertainment DVD Player CH DVD 452 User Manual
Electro Voice Speaker System EVID 42 User Manual
Event electronic MP3 Player DEH P8600MP User Manual
GE Air Conditioner 49 7400 User Manual
Genesis Advanced Technologies Speaker System G71c User Manual