Conair Plumbing Product Bath Mat User Manual

00CN1389 MBTS4 IB 9/8/03 2:01 PM Page 1  
12) Do not use if you have sensitive skin areas or poor circulation. Use by unattended  
children or incapacitated persons may be dangerous.  
CAUTIONS  
HOW TO USE BATH MAT AND MOTOR HOUSING  
IMPORTANT SAFETY  
HOW TO USE REMOTE CONTROL  
• This unit should not be used in the following cases: Tuberculosis, benign and malignant  
tumors, hemorrhages, inflammations of the skin, phlebitis and thrombosis, open and fresh  
wounds, bruises, broken skin or varicose veins, or undetermined calf pain.  
1) Remove bath mat, motor housing, soft surface mat, and air hose from packaging.  
Do not fill tub first.  
13) Disconnect power when not in use, and store in dry place.  
14) Never use while sleeping or drowsy.  
1)Find the Remote Control Power Module and carefully remove it from its wrapping.  
INSTRUCTIONS  
2) Remove battery cover by removing 2 screws on the end of the remote control. Insert the  
2 "AAA" batteries (which are included) following instructions engraved inside the battery  
enclosure. Carefully replace battery cover and make sure "O" ring is intact.  
2) Insert one end of the air hose into the female receptacle on one end of the mat. Press  
in firmly.  
When using an electrical appliance, basic precautions should always be followed, including  
the following: Read all instructions before using this appliance.  
15) Keep the Remote Control Power Module dry when possible. After use, store in a cool, dry  
place. Avoid submerging or having control float on water for long periods of time.  
• Consult your physician, if you have any therapeutic questions regarding unit’s use.  
• Do not use on any unexplained pain before consulting your physician.  
• Discontinue use of unit if pain increases or swelling occurs after application.  
• Do not use on any part of the body that is anesthetized.  
3) Place mat into tub with hose end towards the front of tub. Press mat firmly down to engage  
suction cups on bottom of mat. Suction cups may lose grip on textured surfaces or tubs with  
some dirt buildup. Clean area and moisten suction cups to increase suction cup grip.  
4) Place motor housing on the floor conveniently between the bathtub and electrical outlet.  
Never place the motor housing where it can fall into the tub. Have the motor housing face the  
user in the tub, as the infrared Remote Control needs to be aimed by the user towards the  
motor housing.  
5) Plug motor housing into 120 V AC outlet. See ALCI operating instructions to familiarize  
yourself with ALCI use and function.  
6) Insert the other end of the air hose into the motor housing.  
3) Your Remote Control has the following features:  
Power On/Off - Remotely turn motor On or OFF  
High Bubbles - Highest bubble action  
Medium Bubbles - Medium bubble action  
Low Bubbles - Softest bubble action  
Pulse Feature - Pulse between "High" and "Low" every 3 seconds for custom comfort  
Random Feature - Pulse levels alternately change between "High", "Medium" and "Low".  
DANGER– To reduce the risk of electric shock:  
1) Always unplug this appliance from the electrical outlet immediately after  
using and before cleaning.  
SAVE THESE INSTRUCTIONS  
• Do not use on any part of the body where recent surgery was performed.  
• The recommended massage time is 15-20 minutes.  
2) Do not reach for an appliance that has fallen into water. Unplug immediately.  
FOR HOUSEHOLD USE ONLY  
3) Do not place or store motor housing where it can fall or be pulled into the bathtub.  
Do not fully immerse in or drop into water or other liquid. Store in dry place.  
4) Aim the remote control at the top front of the motor housing. If the remote does not work,  
check to see that the power switch is set to the "remote" position, and that the batteries in  
the remote are fresh and making good contact.  
OPERATING INSTRUCTIONS  
7) Test the Unit by pushing rocker switch on the front of appliance to "HIGH". You should hear  
the motor turn on.  
WARNING– To reduce the risk of burns, fire, electric shock, or injury to persons:  
This appliance has a polarized plug (one blade is wider than the other). As a safety feature,  
this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet,  
reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat  
this safety feature.  
1) An appliance should never be left unattended when plugged in. Unplug from outlet  
when not in use, and before putting on or taking off parts.  
8) Test operation of the Remote Control by pushing the rocker switch to the "REMOTE" posi-  
tion. Now press the remote’s power "ON" button; motor will run on the "HIGH" setting. Try  
other settings to become familiar with the unit's operation. (See “How To Use Remote Control”)  
9) Now fill the bathtub with the amount and temperature of bath water desired. Turn on unit to  
desired setting.  
10) Exercise extra caution getting into and out of the bathtub.  
11) The bath mat massager will not keep hot bath water heated. Even on the HIGH setting,  
the user should expect hot bath water to cool off.  
12) Use of salts and oils is acceptable with your Bath Mat Massager. Please clean the bath  
mat with fresh tap water before storing. Also note that your additions of salt or oil may make  
tub and bath mat surfaces slippery.  
13) After use, be sure you are dry before unplugging power unit.  
14) To store, drain all water from the bath mat sections by rotating gently over the bathtub.  
Disconnect the air hose from the power unit and drain air hose into tub as well. After all free  
water has dripped into the tub, gently wipe any wet surfaces with a clean dry towel before  
storing.  
CAUTION  
USER MAINTENANCE INSTRUCTIONS  
2) Close supervision is necessary when this appliance is used by, on, or near  
children, invalids, or disabled persons.  
®
The Body Benefits Bath Mat can help you relax, relieve tension and soothe sore muscles.  
This appliance is equipped with an Appliance Leakage Circuit Interrupter (ALCI), a safety  
feature that renders it inoperable under some abnormal conditions, such as immersion in  
water.  
Consult your physician or physical therapist for recommendations regarding Bath Mat,  
including water temperature and duration and frequency of use.  
3) Use this appliance only for its intended use as described in this manual. Do not use  
attachments not recommended by Conair.  
MAT MAY MOVE WHEN YOU  
ENTER OR EXIT BATHTUB:  
EXERCISE CAUTION  
To make sure the ALCI is functioning properly, perform the following test. The purpose of this  
test is to allow you to make sure the exclusive water sensing system (ALCI) is working.  
4) Never operate this appliance if it has a damaged cord or plug, if it is not working properly,  
or if it has been dropped or damaged, or dropped into water. Return the appliance to  
a service center for examination and repair.  
CARE AND MAINTENANCE  
Keep your unit clean and clear of obstruction. Check the hose and mat controls, air intakes,  
and connections periodically to make sure they are free of obstruction, hair, lint and other  
particles that could block airflow.  
1) Plug in appliance and press test button on plug (see appropriate diagram below).  
5) Do not carry this appliance by supply cord or use cord as a handle.  
6) Keep the cord away from heated surfaces.  
2) Appliance will stop working. There will be an audible click and a reset button will pop out.  
3) To reset ALCI with a reset button, unit should be unplugged.  
Then push in reset button, and reinsert plug into outlet.  
If the Remote control does not work, first check the setting on the rocker power switch on the  
motor housing, and make sure that the "REMOTE" position has been selected. Then check  
operation by aiming the remote at the motor housing, and selecting a function. If the remote  
still does not operate the unit, make sure that the ALCI "reset" button is engaged. Now check  
to make sure that the batteries in the remote are fresh, and making good contact in the  
battery housing.  
7) Never operate the appliance with the openings blocked. Keep the opening free  
of lint, hair, and other particles. Do not operate on top of shag or loose pile rugs.  
4) If ALCI is not functioning properly, return appliance to  
Reset  
an authorized Conair service center.  
8) Never drop or insert any object into any opening.  
9) Do not use outdoors.  
Test  
15) Dry the Remote Control Power Module after use. Avoid submerging or having control float  
on water for long periods of time.  
5) It is important that if immersion of the transformer or the ALCI  
occurs, this unit be brought to a service center. Do not try to reset.  
10) Do not operate where aerosol (spray) products are being used or where  
oxygen is being administered.  
6) Be sure to repeat test every time you use appliance to confirm  
ALCI is operational. Should the appliance go off and the ALCI reset  
button pop up during use, this could indicate a malfunction in the appliance.  
11) To disconnect, turn control to the “off” position, then remove plug from outlet.  
 

Clarion CD Player RMX465D User Manual
Compaq Personal Computer D510 e pc User Manual
Continental Refrigerator Refrigerator SW48 10C FB User Manual
Craftsman Trimmer 358791072 User Manual
Creda Ventilation Hood CRC65 User Manual
Crown Audio Microphone CM 200A User Manual
Dynex Flat Panel Television DX PDP42 09 User Manual
Frigidaire Ventilation Hood PL36WC41EC User Manual
GE Monogram Ventilation Hood ZV30TSFSS User Manual
GE Mouse HO97796 User Manual